Pricing
The complete price list
All 110 pieces, grouped by size. Every piece is made to order in Pune from 100% recyclable 3D printing filaments — exact grades and suppliers are confidential. Prices include the launch-offer benefits; festive sale prices are shown where applicable.
Small
30 pieces
| Piece | Collection | Size | Filament | Price | Printability |
|---|---|---|---|---|---|
| Arch Light Mini | Signature Table Lights | H 26 cm × W 22 cm × D 10 cm | Recyclable 3D printing filament | ₹10,999 | Single-piece FDM print, no assembly required. |
| Cylinder Slit Table Lamp | Everyday Collection · Table Lights | H 20 cm × Ø 14 cm | Recyclable 3D printing filament | ₹13,500₹14,200 | Slits are vertical, so every opening self-supports. Single-piece shade, separate base, no bridging anywhere in the print. |
| Deepa Festive Lantern Pair | The Ganesha Edition | 24 cm height each · Pair of 2 | Recyclable 3D printing filament | ₹7,999₹10,999 | Jali panels print flat and slot into a printed frame, so the fine lattice never needs supports and a panel can be swapped later. |
| Fluted Décor Bowl | Everyday Collection · Table Décor | H 8 cm × Ø 24 cm | Recyclable 3D printing filament | ₹7,300₹7,700 | Shallow bowl angle keeps overhangs under 45°. Vase-mode print with a doubled rim for strength. Decorative use only, not food-safe. |
| Folded Horizon Sculpture | Signature Decor | H 14 cm × W 22 cm × D 14 cm | Recyclable 3D printing filament | ₹6,499 | Single-piece FDM print, no assembly required. |
| Ganesh Chaturthi Toran Panel | The Ganesha Edition | H 34 cm × W 28 cm | Recyclable 3D printing filament | ₹6,999₹9,499 | Leaves, bells and frame print flat in batches and assemble on a cord, so each element stays crisp and a single part can be replaced. |
| Ganesha Silhouette Table Light | The Ganesha Edition | H 24 cm × Ø 20 cm | Recyclable 3D printing filament | ₹9,999₹12,999 | Shade prints in vase mode at 1.2 mm wall with the silhouette left as a thin translucent inlay, so the outline glows without any cut-outs. |
| Ganpati Aarti Thali Stand | The Ganesha Edition | H 12 cm × Ø 26 cm | Recyclable 3D printing filament | ₹6,499₹8,499 | Dish and pedestal print separately and screw together on a printed thread — both parts sit flat on the bed with no supports. |
| Ganpati Memory Frame | The Ganesha Edition | H 26 cm × W 22 cm · fits 5×7 in | Recyclable 3D printing filament | ₹5,999₹8,499 | Frame prints face-down in one piece for a flawless front face; the petal border is raised relief, so no supports are used. |
| Ganpati Modak Offering Stand | The Ganesha Edition | H 26 cm × Ø 20 cm | Recyclable 3D printing filament | ₹6,999₹8,999 | Tiers, stem and base print as separate round parts and stack on a hidden pin — every layer is flat, so nothing needs supports. |
| Geometric Tray | Everyday Collection · Table Décor | L 26 cm × W 20 cm × H 4 cm | Recyclable 3D printing filament | ₹6,950₹7,300 | Prints flat on its base with faceted walls angled inward. Large first layer means excellent bed adhesion and no warping. |
| Hex Desk Organiser | Everyday Collection · Table Décor | H 8 cm × W 22 cm | Recyclable 3D printing filament | ₹7,700₹8,100 | All internal dividers are vertical, so the whole organiser prints in one go without supports. Rounded corners resist chipping. |
| Honeycomb Cube Table Lamp | Everyday Collection · Table Lights | 14 cm cube | Recyclable 3D printing filament | ₹14,050₹14,800 | Hexagon openings bridge in short spans, printing cleanly with no supports. Open bottom face gives full access for wiring. |
| Lattice Cube Object | Everyday Collection · Sculptures | 16 cm cube | Recyclable 3D printing filament | ₹8,750₹9,200 | Grid struts are square in section so horizontal spans bridge cleanly without supports. 3 mm struts for rigidity. |
| Lotus Petal Offering Bowl Set | The Ganesha Edition | Set of 3 · Ø 12, 16 and 20 cm | Recyclable 3D printing filament | ₹5,999₹7,999 | Three nesting bowls print in one batch in vase mode with gold-tipped petal edges added as a top-layer colour change. |
| Mangal Kalash Sculpture Pair | The Ganesha Edition | 22 cm height each · Pair of 2 | Recyclable 3D printing filament | ₹7,999₹10,999 | Pot, collar, coconut and leaves are four printed parts assembled after finishing, so the rounded body needs no supports anywhere. |
| Modak Gift Box Trio | The Ganesha Edition | Set of 3 · Approx. 9 cm each | Recyclable 3D printing filament | ₹6,499₹8,999 | Boxes and lids print as six simple flat-bottomed parts with printed-in clearance, so the lids fit straight off the bed. |
| Om Sculpture — Desk Edition | The Ganesha Edition | H 20 cm × W 22 cm | Recyclable 3D printing filament | ₹5,999₹7,999 | Symbol prints flat and slots into a printed disc base, avoiding every overhang in the curved form. Gold edging is a second-colour layer. |
| Peacock Diya Wall Pair | The Ganesha Edition | 28 cm height each · Pair of 2 | Recyclable 3D printing filament | ₹7,499₹9,999 | Feather backplate prints flat as relief, the bird and lamp cup print separately and bond on — no supports on any part. |
| Pebble Bud Vase | Everyday Collection · Vases | H 16 cm × Ø 12 cm | Recyclable 3D printing filament | ₹6,650₹7,000 | Compact single-piece print with a flattened base for adhesion. Neck is drawn in gradually to avoid overhangs. Under four printing hours. |
| Ridge Bookend Pair | Everyday Collection · Table Décor | H 16 cm × W 12 cm each · Pair of 2 | Recyclable 3D printing filament | ₹9,600₹10,100 | L-profile prints flat with a thick sole. Sealed sand chamber in the base adds weight without adding print time. |
| Shubh Labh Festive Name Plate | The Ganesha Edition | H 24 cm × W 32 cm | Recyclable 3D printing filament | ₹5,499₹7,499 | Single flat panel printed face-down for a glass-smooth front, with the scrollwork raised as a second-colour layer. No supports. |
| Shubh Mooshak Maharaj — Bookend Pair | The Ganesha Edition | 18 cm height each · Pair of 2 | Recyclable 3D printing filament | ₹8,499₹11,499 | Figures print in halves over an L-shaped steel-weighted foot, giving real holding power without a long print or any supports. |
| Shubh Mooshak Maharaj — Mini Desk Duo | The Ganesha Edition | 12 cm height each · Pair of 2 | Recyclable 3D printing filament | ₹5,999₹7,999 | Each figure prints in two halves with the festive scarf as a separate colour part — no supports, and colours change without a purge tower. |
| Shubh Mooshak Maharaj — Petite Festive Pair | The Ganesha Edition | 20 cm height each · Pair of 2 | Recyclable 3D printing filament | ₹11,999₹15,000 | Single-piece FDM print, no assembly required. |
| Shubh Mooshak Maharaj — Solo Edition | The Ganesha Edition | 20 cm height · 1 sculpture | Recyclable 3D printing filament | ₹6,499₹8,500 | Single-piece FDM print, no assembly required. |
| Siddhivinayak Lotus Table Sculpture | The Ganesha Edition | Approx. 24 cm height | Recyclable 3D printing filament | ₹6,499₹8,499 | Single-piece FDM print, no assembly required. |
| Slim Reed Bud Vase | Everyday Collection · Vases | H 30 cm × Ø 8 cm | Recyclable 3D printing filament | ₹6,450₹6,800 | Narrow footprint is widened with a hidden base flare for print stability. Straight walls, vase mode, one colour, no supports. |
| Swastik Rangoli Tile Set | The Ganesha Edition | Set of 8 · Approx. 12 cm each | Recyclable 3D printing filament | ₹5,999₹7,999 | Eight flat tiles print in one bed-filling batch with a two-colour top layer — the simplest and fastest print in the collection. |
| Wave Block Sculpture | Everyday Collection · Sculptures | H 16 cm × W 18 cm × D 5 cm | Recyclable 3D printing filament | ₹9,100₹9,600 | Relief is raised, not carved through, so the block prints upright with no supports. Sturdy 20% gyroid infill. |
Medium
55 pieces
| Piece | Collection | Size | Filament | Price | Printability |
|---|---|---|---|---|---|
| Arc Sculptural Object | Arc | — | Recyclable 3D printing filament | ₹7,900₹8,300 | Single-piece FDM print, no assembly required. |
| Arch Glow Table Lamp | Everyday Collection · Table Lights | H 26 cm × W 20 cm × D 9 cm | Recyclable 3D printing filament | ₹17,200₹18,100 | Printed as two mirrored halves and bonded, so the arch span never needs supports and the cable channel stays hidden. |
| Ashtavinayak Wall Medallion | The Ganesha Edition | Ø 40 cm × D 4 cm | Recyclable 3D printing filament | ₹8,999₹11,999 | Printed flat on its back as a single relief panel, so the entire motif is self-supporting. Keyhole hanger is built into the rear. |
| Basket Weave Vase | Everyday Collection · Vases | H 22 cm × Ø 18 cm | Recyclable 3D printing filament | ₹8,150₹8,600 | Weave is modelled as shallow relief rather than true openings, so the wall stays watertight and support-free. One colour, 3 mm wall. |
| Bloom Pedestal Vase | Bloom | — | Recyclable 3D printing filament | ₹6,800₹7,200 | Single-piece FDM print, no assembly required. |
| Bloom Petal Table Light | Bloom | Approx. 38 cm height · 24 cm bloom diameter | Recyclable 3D printing filament | ₹12,500₹13,200 | Single-piece FDM print, no assembly required. |
| Bloom Petal Vase | Everyday Collection · Vases | H 20 cm × Ø 19 cm | Recyclable 3D printing filament | ₹11,600₹12,200 | Petals are tucked against the body so overhangs stay shallow. Printed as one piece, then hand-finished at the petal tips. |
| Canyon Wave Vase | Everyday Collection · Vases | H 26 cm × Ø 18 cm | Recyclable 3D printing filament | ₹9,800₹10,300 | Rounded profile stays within a 45° overhang limit, so it prints support-free. Thick 3 mm walls keep the wide belly stable. One colour. |
| Cocoon Table Light | Cocoon | Approx. 34 cm height · 20 cm width | Recyclable 3D printing filament | ₹8,400₹8,800 | Single-piece FDM print, no assembly required. |
| Contour Ridge Table Light | Contour | Approx. 36 cm height · 18 cm width | Recyclable 3D printing filament | ₹13,600₹14,300 | Single-piece FDM print, no assembly required. |
| Coral Weave Table Light | Coral | Approx. 42 cm height · 24 cm shade diameter | Recyclable 3D printing filament | ₹10,500₹11,000 | Single-piece FDM print, no assembly required. |
| Dune Glow Lamp | Signature Table Lights | H 20 cm × W 28 cm × D 22 cm | Recyclable 3D printing filament | ₹9,999 | Single-piece FDM print, no assembly required. |
| Facet Table Light | Facet | Approx. 46 cm height · 26 cm diffuser diameter | Recyclable 3D printing filament | ₹12,500₹13,200 | Single-piece FDM print, no assembly required. |
| Ganesha Chowki Platform | The Ganesha Edition | H 22 cm × W 24 cm × D 24 cm | Recyclable 3D printing filament | ₹10,499₹13,999 | Top, pedestal and base print as three stacked parts with solid walls, rated to carry a heavy idol without flexing. |
| Halo Table Light | Halo | Approx. 42 cm height · 24 cm ring diameter | Recyclable 3D printing filament | ₹9,400₹9,900 | Single-piece FDM print, no assembly required. |
| Himalayan Flow Vase | Signature Vases | H 32 cm × Ø 16 cm | Recyclable 3D printing filament | ₹7,499 | Single-piece FDM print, no assembly required. |
| Lantern Fold Table Light | Lantern | Approx. 32 cm height · 18 cm diameter | Recyclable 3D printing filament | ₹7,800₹8,200 | Single-piece FDM print, no assembly required. |
| Lattice Cube Table Light | Lattice | Approx. 24 cm height · 15 cm square | Recyclable 3D printing filament | ₹9,900₹10,400 | Single-piece FDM print, no assembly required. |
| Lotus Bloom Sculpture | Everyday Collection · Sculptures | H 20 cm × Ø 22 cm | Recyclable 3D printing filament | ₹11,900₹12,500 | Bloom, stem and base print as three parts and assemble, avoiding the steep petal overhangs of a one-piece print. |
| Lotus Current Vase | Signature Vases | H 30 cm × Ø 22 cm | Recyclable 3D printing filament | ₹8,999 | Single-piece FDM print, no assembly required. |
| Lotus Halo Table Lamp | Signature Table Lights | H 34 cm × W 28 cm × D 20 cm | Recyclable 3D printing filament | ₹12,999 | Single-piece FDM print, no assembly required. |
| Louvre Slat Table Light | Louvre | Approx. 28 cm height · 16 cm diameter | Recyclable 3D printing filament | ₹11,500₹12,100 | Single-piece FDM print, no assembly required. |
| Möbius Loop Sculpture | Everyday Collection · Sculptures | H 24 cm × W 20 cm | Recyclable 3D printing filament | ₹12,250₹12,900 | Loop is printed separately from its plinth and bonded, which removes all overhangs. Solid infill at the joint for strength. |
| Monsoon Twist Vase | Signature Vases | H 28 cm × Ø 15 cm | Recyclable 3D printing filament | ₹6,499 | Single-piece FDM print, no assembly required. |
| Moon Disc Table Lamp | Everyday Collection · Table Lights | H 34 cm × Ø 26 cm | Recyclable 3D printing filament | ₹19,650₹20,700 | Disc prints as two shallow shells joined at the rim, keeping the translucent face perfectly smooth with no support marks. |
| Moonrise Table Light | Moonrise | Approx. 26 cm height · 24 cm ring diameter | Recyclable 3D printing filament | ₹9,400₹9,900 | Single-piece FDM print, no assembly required. |
| Mountain Glow Table Lamp | Signature Table Lights | H 32 cm × W 26 cm × D 16 cm | Recyclable 3D printing filament | ₹11,999 | Single-piece FDM print, no assembly required. |
| Nautilus Table Light | Nautilus | Approx. 32 cm height · 28 cm width | Recyclable 3D printing filament | ₹14,600₹15,400 | Single-piece FDM print, no assembly required. |
| Nested Arches Sculpture | Everyday Collection · Sculptures | H 22 cm × W 22 cm | Recyclable 3D printing filament | ₹10,650₹11,200 | Printed flat on its back so the arch spans need no supports. Even wall thickness throughout keeps the print time short. |
| Nimbus Table Lamp | Nimbus | — | Recyclable 3D printing filament | ₹6,300₹6,600 | Single-piece FDM print, no assembly required. |
| Orbit Stone Sculpture | Signature Decor | H 24 cm × W 22 cm × D 12 cm | Recyclable 3D printing filament | ₹7,499 | Single-piece FDM print, no assembly required. |
| Orbit Table Light | Orbit | Approx. 34 cm height · 26 cm ring diameter | Recyclable 3D printing filament | ₹9,900₹10,400 | Single-piece FDM print, no assembly required. |
| Origami Fold Vase | Everyday Collection · Vases | H 24 cm × W 20 cm | Recyclable 3D printing filament | ₹8,950₹9,400 | Flat facets print cleanly with sharp edges and no ironing needed. All folds stay above 50° from horizontal, so it needs no supports. |
| Origami Shade Table Light | Origami | Approx. 40 cm height · 26 cm shade diameter | Recyclable 3D printing filament | ₹8,400₹8,800 | Single-piece FDM print, no assembly required. |
| Parametric Ring Table Light | Parametric | Approx. 52 cm height · 30 cm diameter | Recyclable 3D printing filament | ₹18,800₹19,800 | Single-piece FDM print, no assembly required. |
| Pebble Glow Table Light | Pebble | Approx. 20 cm height · 22 cm width on a stone plate | Recyclable 3D printing filament | ₹7,300₹7,700 | Single-piece FDM print, no assembly required. |
| Petal Stack Table Lamp | Everyday Collection · Table Lights | H 30 cm × Ø 22 cm | Recyclable 3D printing filament | ₹17,950₹18,900 | Petals print flat in batches and clip onto a printed hub — no supports, and a damaged petal can be replaced on its own. |
| Pixel Bloom Table Light | Pixel | Approx. 50 cm height · 28 cm diameter | Recyclable 3D printing filament | ₹14,600₹15,400 | Single-piece FDM print, no assembly required. |
| Pleated Cone Table Lamp | Everyday Collection · Table Lights | H 32 cm × Ø 18 cm | Recyclable 3D printing filament | ₹15,950₹16,800 | Cone tapers outward at under 40°, so it prints upright without supports. Thin translucent wall, warm LED kept clear of the shade. |
| Ribbed Dome Table Lamp | Everyday Collection · Table Lights | H 24 cm × Ø 18 cm | Recyclable 3D printing filament | ₹14,750₹15,500 | Diffuser prints in vase mode at 1.2 mm wall for even light transmission. Base prints separately and houses the LED module. |
| Riddhi Siddhi Diya Tower | The Ganesha Edition | H 45 cm × Ø 22 cm | Recyclable 3D printing filament | ₹7,499₹9,999 | Six lotus lamp rings print flat and thread onto a printed central column, keeping the tall form support-free and easy to pack. |
| Ridge Flute Vase | Everyday Collection · Vases | H 30 cm × Ø 14 cm | Recyclable 3D printing filament | ₹8,550₹9,000 | Single continuous body, vase-mode friendly. Flutes run vertically so no supports are needed. Wall 2.4 mm, wide flat base, one colour. |
| Ripple Dome Table Light | Ripple | Approx. 30 cm height · 26 cm dome diameter | Recyclable 3D printing filament | ₹7,300₹7,700 | Single-piece FDM print, no assembly required. |
| Riverstone Vase | Signature Vases | H 26 cm × Ø 19 cm | Recyclable 3D printing filament | ₹6,999 | Single-piece FDM print, no assembly required. |
| Shubh Mooshak Maharaj — Grand Festive Pair | The Ganesha Edition | 25 cm height each · Pair of 2 | Recyclable 3D printing filament | ₹16,999₹21,000 | Single-piece FDM print, no assembly required. |
| Spindle Rib Table Light | Spindle | Approx. 44 cm height · 12 cm diameter | Recyclable 3D printing filament | ₹11,500₹12,100 | Single-piece FDM print, no assembly required. |
| Spiral Arc Table Light | Arc | Approx. 56 cm height · 36 cm width | Recyclable 3D printing filament | ₹16,700₹17,600 | Single-piece FDM print, no assembly required. |
| Spiral Shell Form | Everyday Collection · Sculptures | H 20 cm × W 20 cm | Recyclable 3D printing filament | ₹11,000₹11,600 | Printed on its flat face so the whole spiral is self-supporting. Ribs are 1.6 mm wide — comfortably above nozzle resolution. |
| Terrace Step Table Light | Terrace | Approx. 34 cm height · 16 cm square base | Recyclable 3D printing filament | ₹15,700₹16,500 | Single-piece FDM print, no assembly required. |
| Terrace Step Vase | Everyday Collection · Vases | H 20 cm × Ø 22 cm | Recyclable 3D printing filament | ₹11,000₹11,600 | Each terrace steps inward, so every layer sits fully on the one below — the strongest possible print orientation. No supports. |
| Topographic Mountain Sculpture | Signature Decor | H 18 cm × W 26 cm × D 18 cm | Recyclable 3D printing filament | ₹8,499 | Single-piece FDM print, no assembly required. |
| Twist Column Table Light | Twist | Approx. 40 cm height · 14 cm diameter | Recyclable 3D printing filament | ₹8,800₹9,300 | Single-piece FDM print, no assembly required. |
| Twist Column Vase | Everyday Collection · Vases | H 40 cm × Ø 14 cm | Recyclable 3D printing filament | ₹10,350₹10,900 | Gentle spiral keeps each layer supported by the one below. Printed upright in one piece with a weighted base ring for stability. |
| WaveGlow Table Light | Wave | Approx. 44 cm height · 24 cm diameter | Recyclable 3D printing filament | ₹13,600₹14,300 | Single-piece FDM print, no assembly required. |
| Zen Stack Stones | Everyday Collection · Sculptures | H 26 cm × Ø 14 cm | Recyclable 3D printing filament | ₹7,900₹8,300 | Each stone is printed separately and stacked on a hidden alignment pin, so nothing overhangs and shipping stays compact. |
Large
20 pieces
| Piece | Collection | Size | Filament | Price | Printability |
|---|---|---|---|---|---|
| Basketweave Column | Weave | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Brick Bond Column | Bond | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Chevron Stack Column | Chevron | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Diamond Facet Column | Facet | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Fluted Reed Column | Reed | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Grand Ganesha Mandir Backdrop | The Ganesha Edition | H 70 cm × W 80 cm × D 32 cm | Recyclable 3D printing filament | ₹26,999₹34,999 | Domes, pillars, jali screens and platform print as fourteen modules that key together internally — every module fits the bed and prints support-free. |
| Grid Relief Column | Grid | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Halo Designer Floor Lamp | Halo | — | Recyclable 3D printing filament | ₹29,300₹30,800 | Single-piece FDM print, no assembly required. |
| Helix Twist Column | Helix | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Honeycomb Column | Comb | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Lattice Screen Column | Jali | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Lotus Mandap Backdrop Arch | The Ganesha Edition | H 60 cm × W 55 cm | Recyclable 3D printing filament | ₹18,999₹24,999 | Arch splits into six printed modules that bolt together internally, keeping every section within the print bed and support-free. |
| Louvre Slat Column | Louvre | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Origami Fold Column | Fold | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Pinstripe Column | Pinstripe | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Scallop Shell Column | Scallop | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Shubh Mooshak Maharaj — Imperial Festive Pair | The Ganesha Edition | 30 cm height each · Pair of 2 | Recyclable 3D printing filament | ₹23,999₹30,000 | Single-piece FDM print, no assembly required. |
| Summit Ridge Vase | Signature Vases | H 38 cm × Ø 17 cm | Recyclable 3D printing filament | ₹7,999 | Single-piece FDM print, no assembly required. |
| Terrace Step Column | Terrace | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Wave Ripple Column | Ripple | 5 ft height · Approx. 33–36 cm diameter — the same slim footprint across the whole range. | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
Extra large / up to 9 ft
5 pieces
| Piece | Collection | Size | Filament | Price | Printability |
|---|---|---|---|---|---|
| Custom Designer Architectural Light | Bespoke | Designed to your space | Recyclable 3D printing filament | ₹1,10,000 | Single-piece FDM print, no assembly required. |
| Himalayan Spine 5 | 5-Ft Lights | H 5 ft (152 cm) × Ø 30 cm | Recyclable 3D printing filament | ₹55,000 | Single-piece FDM print, no assembly required. |
| Infinity Canopy | Infinity | H 5 ft (152 cm) | Recyclable 3D printing filament | ₹57,500₹60,500 | Single-piece FDM print, no assembly required. |
| Lotus Column 5 | 5-Ft Lights | H 5 ft (152 cm) × Ø 34 cm | Recyclable 3D printing filament | ₹62,000 | Single-piece FDM print, no assembly required. |
| Mountain Portal 5 | 5-Ft Lights | H 5 ft (152 cm) × W 40 cm × D 26 cm | Recyclable 3D printing filament | ₹68,000 | Single-piece FDM print, no assembly required. |
Custom colours, sizes and fully bespoke designs are available on request — visit the Custom Studio or send an enquiry. Delivery is free during the launch offer, with global delivery quoted for the USA, Europe and China.